High Precision Low Ripple High Stability Laboratory High Voltage Power Supply with 100kv 1kw Variable Hv Output

Product Description

LTP Series High Precision Laboratory High voltage DC Power Supply
Power range: 30W ~ 1KW Voltage range: 1KV ~ 40KV Current range: 1mA ~ 1A 2U / 19-inch standard chassis Precise voltage and current setting and measurement capabilities OVP, OCP, short circuit and load discharging protections etc.
Overview
LTP series is high voltage power supply designed for high voltage experimental test needs with single-phase 220Vac±10% input. Its maximum output power can reach 1000W and the maximum output voltage can reach 40kV, it is featured for stable & accurate output and low output ripple. Comparing with the traditional linear HV power supply, its high-frequency switching technology can achieve faster response rate and higher efficiency with smaller size and light weight. It is a best choice for HV laboratory testing, product testing and other HV applications.
Features
CV/CC working modes. Output voltage & current adjustable from 0 to 100% Stable & Low ripple HV output. 4-digit LED digital meters display. Perfect & Complete protection functions Compact structure, small size and light weight.
Optional functions
High output precision up to 0.1% (+0.1%) 0 ~ 10V analog signal control (standard DB interface) (+AC) RS communication interface (RS232 / RS485 optional) (+RC)
Specifications
Input	Voltage		Single-phase 220V±10%
	Frequency		50Hz/60Hz
Output	Rated power		****W
	Output voltage adjusting range		1KV/2KV/3KV/4KV5KV/10KV/20KV/30KV/40KV available ** (For other output voltages, please contact us for details)
	Output current adjusting range		0A ~ ****mA
	Output polarity		Positive or Negative (both available) Client must choose one output polarity before ordering.
	Output connection		HV connector made by IdealTek.
	Output cable		HV cable, 1.5m long provided.
	Line regulation		0.5% for no load to full load at output.
	Load regulation		0.5% for ±10% change in input voltage.
	Ripple (Vr.m.s.)		≤0.5%@ rated output.
	Efficiency		≥85%
Setting & Display	Output control mode		10-turn potentiometer on front panel.
	Display mode		4^1/2 LED digital display
Protection & Monitoring functions	Load discharging protection			When the load has discharging due to insufficient safety distance between load and ground, the power supply shutdown the high voltage output, and then restarts, so cycle like this till the discharging fault is eliminated.
	Short circuit protection			When a short circuit occurs between the load and the ground, the power supply works in constant current mode, the current is limited to the maximum value, and the voltage drops to 0 to protect the internal inverter from damage.
	Over current protection			When the users' load exceeds the rated load and cause over-loading, the power supply works in constant current mode, the power supply output current does not change, and output voltage decreases.
	Over voltage protection			When the power supply is unloaded, the power supply works in constant voltage mode to prevent power supply from overvoltage damage.
Noise			≤55dB
Protection degree			IP20
Cooling method			Forced air cooling
MTBF			50000 hours @ 25ºC
Working environment conditions	Ambient temperature			10ºC~40ºC
	Humidity			10%~90%(non-condensing)
	Height			≤2000m
Storage environment conditions	Ambient temperature			-20ºC~60ºC
	Humidity			10%~90%(non-condensing)
	Height			≤4000m
Size (W*H*D) (mm)			200*100*300 (≤100W) 500*88*600 (19'' 2U standard chassis) (>100W)
Note: every power supply has 48 hours full load burn-in test @ 40ºC
Safety caution
This power module has HV output, only professional person could operate it. Please check power module as below before start-up. Keep power module clean and good ventilation. HV input & output connectors or HV load no touch anything. Please check back current of load well connected with GND bolt at the back of power module.
Model list
KV		mA			P (KW)		Model
1		1000			1		LTP-220VAC-(N/P)1KW-1KV
2		500			1		LTP-220VAC-(N/P)1KW-2KV
3		333			1		LTP-220VAC-(N/P)1KW-3KV
4		250			1		LTP-220VAC-(N/P)1KW-4KV
5		200			1		LTP-220VAC-(N/P)1KW-5KV
10		100			1		LTP-220VAC-(N/P)1KW-10KV
20		50			1		LTP-220VAC-(N/P)1KW-20KV
30		33.3			1		LTP-220VAC-(N/P)1KW-30KV
40		25			1		LTP-220VAC-(N/P)1KW-40KV
More models are coming soon.
Drawings (for reference only)
200*100*300 (≤100W) (Black)
2U chassis (>100W) (RAL7035)
2U chassis (>100W) (Black)