High Voltage DC Power Modular 30 Kv 1 Kw

• Output Type: Single
• Warranty: 1 Year
• Output Power: 1kw
• Input Voltage: 220V
• Connection Mode: Series Switching Power Supply
• Starting Mode: Self-excited Switching Power Supply
• Model NO.: CCP1000 - 220 - P / N - 30
• Voltage Regulating Mode: Frequency Modulation Type
• Power Supplying System: Terminal Power Distribution Equipment
• Energy Transmission: One-way Transmission
• Modulation System: PFM
• Brand: Idealtek
• Output Voltage: 30kv
• Output Current: 33mA
• Output Polarity: Positive or Negative
• Circuit Mode: AC/DC High Frequency Conversion
• Working Mode: Constant Voltage / Constant Current
• Output Setting: 10-Turn Potentiometer
• Protection: Short, Oh, Over Load, Load Discharging
• Remote Control: 0~10V / 4~20mA Analog Signal Control / RS Ports
• Application: High Voltage Capacitor Charging, High Voltage Char
• Transport Package: Plywood Case
• Specification: IGBT & HF transformer
• Trademark: iDealTeknic
• Origin: China
• HS Code: 85044019
• Production Capacity: 150PCS/Month

Product Description

CCP1000 Series Capacitor Charging High Voltage Power Module Model: CCP1000-220-P/N-30

Overview

CCP1000 high voltage power supply is specially designed for capacitor charging application, it is featured for high reliability, high-performance and performance to price ratio. Rated output power: 500W, Maximum output power: 1000W. Single-output type voltage range: 30KV Output polarity: positive or negative (on-demand)

Features

Charge and discharge frequency: customizable Repeatability accuracy: better than 0.5% Withstand ground potential rise. Output voltage & current continuously adjustable. Output voltage adjustable via local potentiometer or remotely. Output polarity on customers' demand. Small size, light weight Stable output, high efficiency (85%)

Specifications

Input

Typical value

Unit

Voltage

220 (200 ~ 240Vac)

Vac

Current

< 6 @ 220Vac

A

Output

30

KV

Range

0-30

KV

Power

1000

W

Current

33

mA

Features

Line regulation

<0.5%

Load regulation

<0.5%

Temperature drift

<300ppm/ºC (working temperature<55ºC)

Ripple voltage

<1% (@100% load) (R.M.S value)

Working temperature

-10ºC ~ 55ºC

Storage temperature

- 20ºC ~ 80ºC

Size

360mm×180mm×136mm

Weight

2Kg ~ 6Kg (depends on output voltage)

Power Curve (40KV, 1000W)

Continuous charging & discharging curve (40KV, 1000W)

Physical drawing

Input interfaces

Output interfaces

Pin code

Definition

Pin code

Pin code

Definition

L

LIVE LINE

1

GND

GND

N

NULL LINE

2

EOC

End of charging

E

GND LINE

3

VDEM

Voltage setting

DB9 Control pin interface (female)

4

VREF

Reference

5

VFBK

Voltage feedback

6

+12VDC

+12V voltage

7

HV ENABLE / INHIBIT

HV ON / OFF

8

IDEM

Current setting

The port on power supply main board is female, male port is required for connection to complete the corresponding control functions.

9

IFBK

Current feedback

Enclosure

Aluminum alloy

Control pin description Pin1: control GND (GND). Pin2: End of charging detection, The internal circuit is opt-coupler collector open circuit output, when the power supply is under charging state, pin-2 to the ground (pin-1) is under cut-off state; when the capacitor voltage is fully charged, pin-2 to the ground (pin-1) is conducted, which will allow no more than 20mA current flow through. When the voltage on capacitor is below the set charging voltage, pin-2 to the ground (pin-1) is restored to the cut-off state from conducted state. Pin3: voltage setting, 0-5V corresponding to 0-rated output voltage value. Pin4: Voltage reference output 5V. Pin5: voltage feedback, 0-5V corresponding to 0-rated output voltage value. Pin6: +12V power supply for external use, current not exceeding 200mA. Pin7: HV enable / inhibit port: add +12Vdc between this pin and pin1, HV ON; 0V or floating, HV OFF. Pin8: current setting: 0-5V corresponding to 0-rated current value. Pin9: current feedback: 0-5V corresponding to 0-rated current value.

Note: Current of the product is sampled from primary current control, the current setting signal value should be set greater than 0.7V, otherwise no voltage and current output.

Safety notes

The power supply is high voltage power supply, please operate carefully under instruction of professional persons, or it will cause human safety problem. Please check below issues before starting power supply. Power supply should be located in clean and dry condition. No relative objects besides HV output or HV load. Make sure that reverse current of load well-grounded via GND terminals on the back panel.