Customization: | Available |
---|---|
Input Voltage: | 220VAC / 380VAC |
Output: | AC & DC Mixed Output |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
ADP Series Capacitor Ripple Current Endurance Test Power Supply | ||||||||||
|
![]() |
|||||||||
Overview | ||||||||||
ADP series is specially designed for ripple current endurance test of different kinds of capacitors, such as metal film capacitors and film capacitors, it has wide output voltage, current and frequency range to meet various test requirements. This series has Max. DC output voltage up to 3000V, Max. AC output voltage up to 400V, Max. AC output current up to 400A, and output frequency optional from 50Hz to 1KHz. This series is equipped with high frequency & high temperature fixture and connection line for good simulation of capacitor working conditions in groups, so that accuracy test parameters could be provided to users and capacitor manufacturers. |
||||||||||
![]() |
||||||||||
Features | ||||||||||
|
||||||||||
Optional functions | ||||||||||
|
||||||||||
Applications | ||||||||||
|
||||||||||
Specifications | ||||||||||
Input | Voltage | Single - phase 220Vac±10% or Three - phase 380Vac±10% | ||||||||
Frequency | 50Hz±10% | |||||||||
Output | Output terminal | AC & DC mixed output on front panel. | ||||||||
DC voltage adjusting range | Max DC output: as requirements | |||||||||
AC current adjusting range | One-side Max. AC output: as requirements | |||||||||
DC Part | ||||||||||
Accuracy (C.V.) | Line regulation | ≤0.1% Of the rated value ± 1 digit (output voltage change ratio under input ±10% change) | ||||||||
Stability | ≤0.3% of the rated value (output voltage change ratio due to 8 hours continuously working) | |||||||||
Temp. coeff.offset (within 30mins) |
≤0.4‰/ºC of the rated value ± 2 digits (output voltage change ratio due to environment temperature changes) | |||||||||
Load regulation | ≤0.2% of the rated value ± 1 digit (output voltage change ratio due to output current change from 0 to rated value) | |||||||||
Accuracy (C.C.) (Optional) | Line regulation | ≤0.1% Of the rated value ± 1 digit (output current change ratio under input ±10% change) | ||||||||
Stability | ≤1% of the rated value (output current change ratio due to 8 hours continuously working) | |||||||||
Temp. coeff.offset (within 30mins) |
≤0.4‰/ºC of the rated value ± 2 digits (output current change ratio due to environment temperature changes) | |||||||||
Load regulation | ≤0.2% of the rated value ± 1 digit (output current change ratio due to output current change from 0 to rated value) | |||||||||
Ripple + noise (r.m.s) | ≤0.01% of the rated value+10mV (80%~100% rated output) | |||||||||
Output voltage adjusting range | Adjustable (0~rated value) | |||||||||
Output current adjusting range | Adjustable (0~rated value) (optional) | |||||||||
Automatic timing range | 1 ~ 9999 hours | |||||||||
Adjusting mode | 10-turn Potentiometer | |||||||||
Protection functions | Output will be cut down when over voltage / over current | |||||||||
Short alarm | Withstand short-circuit and alarm | |||||||||
Working mode | Withstand long-term continuous working at full load. | |||||||||
Output voltage & current display | Digital LED | |||||||||
Display precision | As per output values | |||||||||
Display error | ≤±1%±1digit (range:1%~100% of the rated value) | |||||||||
Total display error | ≤±0.01% | |||||||||
AC Part | ||||||||||
Output voltage adjusting range | 1% ~ rated voltage continuously adjustable | |||||||||
Output current adjusting range | 1% ~ rated current continuously adjustable | |||||||||
Adjusting mode | 10-turn Potentiometer | |||||||||
Output waveform | Sine wave (distortion≤5% measured @ full power output) | |||||||||
Output frequency | 50Hz ~ 1KHz. Fixed output frequency levels when output frequency goes beyond 1Khz (Max. 5 levels) such as 5KHz/10KHz/15KHz/20KHz/30KHz…up to 100KHz (Frequency error ≤±1%) |
|||||||||
Output voltage & current display | Digital LED | |||||||||
Display precision | As per output values | |||||||||
Display error | ≤±1.5%±2digits (range:1%~100% of the rated value) | |||||||||
Protection functions | Output will be cut down when over voltage / over current | |||||||||
Working mode | Withstand long-term continuous working at full load. | |||||||||
Load characteristic | Capacitive load | |||||||||
Environment conditions | Indoor use only Temperature: -20ºC~40ºC Humidity: ≤80% |
|||||||||
Input Voltage: Power source voltage can be changed to others on request.
|
||||||||||
Standard model list | ||||||||||
Type | DC Output | AC Voltage | AC current | Frequency | Output power | Optional functions | Remarks (if any) | |||
ADP (low frequency) | DC3000V1.5A (Max. output) |
10 ~ 100V | 5 ~ 100A | 45-1000HZ continuously adjustable Fixed frequency levels 50 / 60 / 100 / 120 / 200HZ settable |
0 ~ 20KW |
|
||||
10 ~ 200V | 5 ~ 50A | |||||||||
10 ~ 50V | 5 ~ 200A | |||||||||
15 ~ 200V | 5 ~ 10A | 100KHz | 0 ~ 5KW | |||||||
10 ~ 50V | 5 ~ 50A | |||||||||
10 ~ 100V | 5 ~ 100A | 45-1000HZ continuously adjustable Fixed frequency levels 50 / 60 / 100 / 120 / 200HZ settable |
0 ~ 20KW | |||||||
10 ~ 400V | 5 ~ 50A | |||||||||
10 ~ 50V | 5 ~ 200A | |||||||||
DC600V1A | 50V | 5A | 50 ~ 999.9Hz | |||||||
100V | 2A | |||||||||
DC800V1A | 30V | 60A | ||||||||
ADP (high frequency) | DC3000V1.5A (Max. output) |
15V | 500A | 5KHz / 8KHz | 15KW |
|
||||
15V | 400A | Max. 5 frequency levels within 5KHz ~ 20KHz | 12KW | Client needs to provide load for testing if AC current goes beyond 300A | ||||||
15 ~ 20V | 300A | |||||||||
15 ~ 30V | 200A | |||||||||
10 ~ 200V | 5 ~ 10A | 20KHz / 40KHz / 60KHz / 80KHz / 100KHz | 4KW | These outputs cover the models whose output frequency go beyond 40KHz. | ||||||
10 ~ 100V | 5 ~ 20A | |||||||||
10 ~ 50V | 5 ~ 50A | |||||||||
|